Multispectral Imaging

Multispectral Color Technique

Depending on its chemical composition, each material reflects visible light in different ways, with a characteristic reflectance curve, therefore generally showing a different visible colour. Generally speaking, we can distinguish materials by observing their color.
Just looking at something, however, it is not possible to understand the exact reflectance curve, since our eyes are only sensible to 3 wavebands: the red, the green and the blue one.

   

In practice the human eye perceives each color like three numbers: one related to amount of radiation in the red waveband, one related to the radiation in the green waveband and one related to the radiation in the blue band.

However, two radiations having different spectral content, i.e. related to different materials, may be perceived as identical when they have the same amount of radiation in the red, green and blue bands. The eye cannot distinguish between them as it perceives the same 3 numbers.
This phenomenon is known as metamerism.

Using a multispectral system the possibilities of metamerism are much reduced, since the information is acquired on more bands. The Art-Test device employs  8 bands or more , instead of 3.

In practise we have higher numbers instead of 3 to describe each color, and a much improved way to distinguish among materials showing a similar color

Through our equipment we are able to distinguish among different materials, with different reflectance or emission curves, even if they present the same colour to the eye.

 

Until recently, the only way to document the reflectance or fluorescence emission of a painting surface was to use a spectrophotometer; however, this device would only acquire data from a spot. With an imaging device the information is collected for all points of the surface at the same time.

How is it done?

A white light is shined on the artwork. A number of separate images, one for each spectral band, are acquired with a scientific calibrated CCD camera and a set of interferential filters.

In this way for each image it is possible to quantify the amount of radiation received. The images can then be used to evaluate the amount of reflection or emission present in each band for each pixel.

The multispectral images can then be recombined into an RGB image, which will show a much more faithful reproduction of what is perceived with a direct observation, since with this method it is possible to approximate the tristimulus curves in a more accurate way, compared with what is done in the standard RGB cameras.
The acquired data can then be processed and allow for a better identification of materials.

same swatches of pictorial materials acquired in different wavebands via a multispectral system
same swatches of pictorial materials acquired in different wavebands via a multispectral system